Vacuum Equipment & Supplies
Pumps & Accessories
Edwards Rotary Vane Pumps
Edwards Model RV3XP
- 115V/230V//1/60
- 48dBA
- Dual Mode
- Intrusive frequencies minimized
- Easy to use gas ballast
- Fast acting - without gas ballast
- Oil capacity Max/Min: 0.28/0.2 liters
- Weight: 10 kg
- 115/230V, 60Hz
- Edwards Supergrade A oil recommended
- Fast acting inlet valve for system
- protection
- High torque, dual voltage/dual frequency motor
- On/off switch
- IEC socket
- Electronic start relay
- Efficient high pressure lubrication
- Oil tight with printed gaskets, effective shaft
- Clamped-in sight glass
- Oil box well contains filling spills
- Hi-tech polymer blades
- Large diameter, easy clean oil passages
- Consistent, built-in quality, cast bar
Edwards Model RV3 Double Stage Rotary Pump
- Displacement capacity (swept volume): 57 l/min
- Ultimate vacuum without gas ballast (partial pressure): 1.9 x 10-4 torr
- Oil capacity Max/Min: 0.55/0.35 liters
- Weight: 18.2 kg
- 115/230V, 60Hz
- Edwards Supergrade A oil recommended
Edwards Model RV5 Double Stage Rotary Pump
- Displacement capacity (swept volume): 113 l/min
- Ultimate vacuum without gas ballast (partial pressure): 0.75 x 10-4 torr
- Oil capacity Max/Min: 0.55/0.42 liters
- Weight: 19.6 kg
- 115/230V, 60Hz
- Edwards Supergrade A oil recommended
Pumps of other capacities are available upon request. Please contact Soquelec for further information.
|
Edwards Model RV8 Double Stage Rotary Pump
- Displacement capacity (swept volume): 190 l/min
- Ultimate vacuum without gas ballast (partial pressure): 0.75 x 10-5 torr
- Oil capacity Max/Min: 0.55/0.43 liters
- Weight: 22.8 kg
- 115/230V, 60Hz
- Edwards Supergrade A oil recommended
Edwards Model FL20K Foreline Trap
This trap has been developed for use in clean pumping systems, to prevent back-migration of rotary pump oil vapour into the system. The trap is filled with activated alumina which has exceptional trapping properties for oil vapour. Requires KF-25 inlet adapter accessory for E2M1 pump.
Edwards Outlet Mist Filters
Mist filters are used to capture oil mist which could otherwise be ejected to atmosphere, either when gas ballasting or when pumping high gas throughputs. Designed to fit directly to the pump outlet.
|
All prices are in Canadian Dollars. To request a price quotation or for other inquiries, please contact us.